माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत

माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत
Madhav Institute of Technology & Science, Gwalior (M.P.), INDIA

Deemed University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत

Deemed to be University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

Gola Ka Mandir, Gwalior (M.P.) - 474005, INDIA
Ph.: +91-751-2409300, E-mail: vicechancellor@mitsgwalior.in, Website: www.mitsgwalior.in

Faculty Profiles

Bhupendra Kumar Pandey

 
Designation: Assistant Professor
Qualification: M.Tech (Thermal Engineering), IIT Roorkee
Area of Interest: Thermal and Fluid mechanics
Phone No: 9174426657
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • About Faculty: Mr. Bhupendra Pandey is an Assistant Professor in the Department of Mechanical Engineering at Madhav Institute of Technology and Science, Gwalior, Madhya Pradesh, India. He completed his M.Tech. from the Indian Institute of Technology, Roorkee, India. He has more than 18 years of teaching and research experience. He has worked as Scientist/Engineer ‘SC’ in Indian space research Organisation (ISRO), Thiruvananthpuram. He has also worked as an Associate manager in HERO MOTO CORP, Dharuhera, Haryana.
  • Work Experience:

    Total Teaching/ Research Experience-18 years
  • Administrative Experience:
    1. Time table coordinator
    2. SWAYAM coordinator/Associate coordinator 
    3. NIRF Committee member
    4. Coordinator, curriculum development in the department.
    5. Member, Departmental exam committee.
    6. Member, Central Exam conduction committee
    7. Group leader, institute anti-ragging committee.
  • Workshop/Conference/Organized/Attended:

    Workshop Organized-01

    Workshop/Conference attended-10
  • Publications:

    Total Publication in international/ National Journals-02

Dr. Nitin Upadhyay

Designation: Assistant Professor
Qualification: PDF (IIT Delhi), Ph.D. (IIITDM Jabalpur), M.Tech (NIT Trichy)
Area of Interest: Nonlinear Dynamics Analysis, Vibration Analysis, Rotor Dynamics
Phone No: 9074699715
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • About Faculty: Dr. Nitin Upadhyay is an Assistant Professor at Madhav Institute of Technology & Science, Gwalior. He holds a Master's degree from NIT Trichy and a Ph.D. from IIITDM Jabalpur, with a post-doctoral fellowship from IIT Delhi. Dr. Upadhyay specializes in subjects like Mechanical Vibrations and Industrial Engineering and is highly regarded for his effective teaching. His research interests include Dynamical Systems, Fault Diagnosis, and Finite Element Analysis, with several publications to his name. Dr. Upadhyay is dedicated to advancing mechanical engineering and inspiring future engineers.
  • Education and Qualification:

    Ph.D., Mechanical Engineering, PDPM Indian Institute of Information Technology Design and Manufacturing, 2018

    M.Tech, Industrial Engineering & Management, National institute of Technology Trichy, 2013

    B.E., Mechanical Engineering, Madhav Institute of technology & Science Gwalior, 2011
  • Work Experience:

    6th April 2021- Till Date Assistant Professor

    Department of Mechanical Engineering, Madhav Institute of technology & science Gwalior                 

    2019-2020, Post Doctoral Fellow

    Department of Mechanical Engineering, Indian Institute of Technology Delhi                                                                             

    July 2013 to July 2014, Assistant Professor

    Department of Mechanical Engineering, MPCT Gwalior
  • Research Supervision:

    M.Tech (1)
  • Honors, Award & Recognition:

    1. Recieved Post Doctoral Fellowship From IIT Delhi

    2. Outstanding Reviewer 'Mechanical System and Signal Processing" Elsevier 
  • Publications:

    International Journals                                                                                                                                                                                     

    1. Upadhyay, N., Chourasiya, S.K. Extreme learning machine and ensemble techniques for classification of rolling element bearing defects. Life Cycle Reliab Saf Eng 11, 189–201 (2022). https://doi.org/10.1007/s41872-022-00196-1.

    2. Upadhyay N, Sharma A, Sinha AK, Chourasiya SK (2021) Wavelet time scattering features for the bearing defectsclassification. Design Eng: 2905–2913. Available at http://thedesignengineering.com/index.php/DE/article/view/7269 

    3. Upadhyay N, ASSESSMENT OF THERMAL CONDUCTIVITY OF PHASE CHANGE MATERIALS BY INCORPORATING METAL AND METAL OXIDES NANOPARTICLES. Advances and Applications in Mathematical Sciences Volume 21, Issue 9, July 2022, Pages 5223-5230.

    4. Upadhyay, N., Kankar, P.K. Diagnosis of bearing defects using tunable Q-wavelet transform. J Mech Sci Technol 32, 549–558 (2018). https://doi.org/10.1007/s12206-018-0102-8.

    5. Sharma A, Upadhyay N, Kankar PK, Amarnath M. Nonlinear dynamic investigations on rolling element bearings: A review. Advances in Mechanical Engineering. March 2018. doi:10.1177/1687814018764148. 

    6. Upadhyay, N., Metsebo, J., Kankar, P.K. et al. An Improved Theoretical Model of Unbalanced Shaft-Bearing System for Accurate Performance Prediction of Ball Bearing Due to Localized Defects. Iran J Sci Technol Trans Mech Eng 42, 293–309 (2018). https://doi.org/10.1007/s40997-017-0098-9.

    7. N. Upadhyay & P. K Kankar (2017) Dynamic analysis of rotor-bearing system by considering the transverse crack on rotor, European Journal of Computational Mechanics, 26:3, 336-350, DOI: 10.1080/17797179.2017.1354577. 

    8. Metsebo, J., Upadhyay, N., Kankar, P.K. et al. Modelling of a rotor-ball bearings system using Timoshenko beam and effects of rotating shaft on their dynamics. J Mech Sci Technol 30, 5339–5350 (2016). https://doi.org/10.1007/s12206-016-1101-x.

    9. S. Kavathekar, N. Upadhyay, P.K. Kankar, Fault Classification of Ball Bearing by Rotation Forest Technique, Procedia Technology, Volume 23, 2016, Pages 187-192, ISSN 2212-0173.

    Book Chapter     

    10. Upadhyay N, Kankar PK (2020) Integrated model and machine learning-based approach for diagnosis of bearing defects. In: Gupta V, Varde P, Kankar P, Joshi N (eds) Reliability and risk assessment in engineering. lecture notes in mechanical engineering. Springer, Singapore

    11. Kumar Sinha, Agnivesh, Rathore, Ram Krishna, Kumar Soni, Vinay, Rao, K. Raja, Upadhyay, Nitin and Pamnani, Gulab. "Chapter 8 Effect of alloying elements on the phases of high-entropy alloys". High-Entropy Alloys: Processing, Alloying Element, Microstructure, and Properties, edited by Anil Kumar, Rituraj Chandrakar, Vikas Dubey and Marta Michalska-Domańska, Berlin, Boston: De Gruyter, 2023, pp. 89-98. https://doi.org/10.1515/9783110769470-008

    12. N. Upadhyay "Phase Change Materials for Enhancing Heat Transfer in Latent Heat Storage Systems" Green Manufacturing for Industry 4.0: Building a Sustainable Future with Smart Technology (1st ed.). Productivity Press. https://doi.org/10.4324/9781003439684

    Conferences  Proceedings

    13. Upadhyay N, Kankar PK (2017) Extreme learning machine and decision tree based ensemble techniques for diagnosis of rolling element bearing defects. In: Proceeding of International Congress on Sound and Vibration.

    14. Upadhyay, N, Jules, M, Kankar, PK, & Nbendjo, BRN. "Mathematical Model for Rotor Bearing System by Considering the Effect of Shaft Dynamics and Localized Bearing Defects." Proceedings of the ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 8: 28th Conference on Mechanical Vibration and Noise. Charlotte, North Carolina, USA. August 21–24, 2016. V008T10A024. ASME.  
Dr. S K Chourasiya

Dr. Surendra Kumar Chourasiya

Designation: Assistant Professor
Qualification: Ph.D. (IIT Roorkee), M. Tech (IIT BHU)
Area of Interest: Tribology, Composite Materials, Spray Forming, Heat Treatment
Phone No: +91 7409408995
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

  

  • Education and Qualification:
    • Ph. D. 2020 Indian Institute of Technology, Roorkee, U.K. IIT, Roorkee
    • M. Tech. 2014 Indian Institute of Technology BHU, Varanasi, U.P. IIT (BHU), Varanasi
    • B. E. 2012 MITS, Gwalior, M.P. RGPV, Bhopal 
  • Work Experience:
    • Assistant Professor THDC-IHET, Tehri (Uttarakhand) TEQIP-III (NPIU), MHRD 05/01/2018 to 31/03/2021
    • Assistant Professor MITS GWALIOR MITS GWALIOR 06-04-2021-TILL DATE 
  • Administrative Experience:
    1. Departmental Coordinator Engineers Day THDC IHET 15 Sept 2018
    2. Student coordinator AMPCO 2017, International conference. IIT Roorkee 30 Nov-2 Dec 2017
    3. Workshop In charge Department of Mechanical Engineering THDC-IHET, Tehri Aug-2019-March-2021
    4. Departmental T&P Department of Mechanical Engineering THDC-IHET, Tehri Aug-2019- March-2021
    5. Gate Coordinator Department of Mechanical Engineering THDC-IHET, Tehri Aug-2019- March -2021
    6. Students DPGC Member Metallurgical Engineering IIT (BHU) July 2013-2014
    7. Students SPGC Member Metallurgical Engineering IIT (BHU) Jan 2013-14
  • Research Supervision:
    1. Characterization of chill cast warm rolled Al-Si Alloy 2015 
    2. Forging effect on aluminium alloy LM6 2015
    3. Tribological behavior of hybrid aluminium metal matrix composites” 2016
    4. Synthesis and characterisation of hybrid aluminium metal matrix composite 2016
    5. Synthesis and wear behaviour of aluminium hybrid matrix composite 2016 
    6. Synthesis and characterization of stir cast solid lubricants based hybrid Al-Alloy composite 2017 
    7. Effect of solid lubricants on tribological properties of hybrid AMMCs 2017 
  • Research Projects, Consultancy & Patents:

    Peered SCI Journals

    1. Chourasiya SK, Gautam G, Singh D., Performance enhancing of spray formed Al/graphite alloy composite by rolling. Met Mater Int
    2. Chourasiya SK, Gautam G, Singh D., Mechanical and tribological behavior of warm rolled Al-6Si-3Graphite self-lubricating composite synthesized by spray forming process. Silicon
    3. Chourasiya SK, Si A, Singh G, Gautam G, Singh D., A novel technique for automatic quantification of porosities in spray formed warm rolled Al-Si-Graphite composite. Mater Res. Exp.
    4. Chourasiya SK, Gautam G, Singh D., Enhancing the Microstructure and Tribological Performance of Spray Formed Al Alloy by Cryorolling. Silicon 

     

    Peered Scopus Journals

    1. Chourasiya SK, Gautam G, Singh D., Influence of rolling on wear and friction behaviour of spray formed Al alloy composites. Mater Today 2020.
    2. Chourasiya SK, Gautam G, Kumar A., Spray forming technique for aluminium matrix materials: A review. Mater Today 2020.
    3. Mrinmoy Sinha, Atul Kumar, Ajay Tripathi, Surendra Kumar Chourasiya, Microstructure and mechanical properties of friction-stir welded interstitial-free steel using WC tool, IOP Conference Series: Materials Science and Engineering, 1136 (1), 2021

     

    Peered Book Chapter

    1. Chourasiya SK, Gautam G., Influence of Cryorolling on Spray-Formed Al–Si Alloy. Advances in Engineering Design (Springer Singapore), 2020, 269-276.
    2. Chourasiya SK, Gautam G, Kumar N. Mohan A., Mohan S., Tribology of spray formed aluminium alloy and their composite. Tribology and surface engineering for industrial application (CRC Press)-2021
  • Workshop/Conference/Organized/Attended:
    1. Organizing Member 3rd National conference on Energy , Communication and Intelligent computing THDC IHET, Tehri (Uttarakhand) 18-19 May 2019
    2. Coordinator Debate competition on Hindi divas THDC IHET 20 Sept. 2019
    3. Coordinator Workshop on Advance Materials for engineering Applications THDC IHET 03-05 Oct. 2019
    4. Organizing member STC on Network and cyber Security THDC IHET 04-08 June 2018
    5. Coordinator One day workshop on Faculty development and Motivation on world environment day THDC IHET 5th June 2018
    6. Organizing Member Three weeks induction Program 2018 THDC IHET 13-31 Aug. 2018 
    7. Organizing Secretary Interdisciplinary STC on Hydropower Generation and Policies THDC IHET Aug 27-01 Sept. 2018
  • Complete Resume:

    https://drive.google.com/drive/folders/1T-ZWWQzNUzb6LsLbf2nW6s7ap7q6CSME?usp=sharing

Dr. Gavendra Norkey

Designation: Assistant Professor
Qualification: Ph.D. 
Area of Interest: Advanced Machining Processes, CIM, Machining of Advanced Engineering Materials
Phone No: 8770541940, 9406989347
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Education and Qualification: PhD. in Mechanical Engineering
  • Work Experience: Teaching Experience: 20 Years 
  • Research Supervision: Ph.D. Thesis Supervision: 01 Completed                                          01 Pursuing
  • Research Projects, Consultancy & Patents: Details of Publications International Journal Prajapati A., Norkey G. and Gautam G.D., Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid response surface based grey wolf optimization (RSGWO) algorithm” Published in Proc IMechE Part C: J Mechanical Engineering Science 2022, Vol. 0(0) 1–17, DOI: 10.1177/09544062221096557. [SCI]   Singh K.P., Bahl A., Norkey G and Gautam G.D. (2021), “Experimental investigation and parametric optimization of the hole circularity and taper angle during laser drilling kevlar-29 fiber composite” published in Materials today proceedings (Elsevier), https://doi.org/10.1016/j.matpr.2021.10.155 2214-7853. [SCOPUS] Norkey G., Singh, K. P., Prajapati, A. and Sharma, V. (2021), “ Intelligent parameters optimization for laser cutting of highly reflective and thermally conductive materials using Artificial Neural Network” published in Materials today proceedings (Elsevier), Volume 46, pp. 4757 – 4764, 2021 Available online 25 February 2021, https://doi.org/10.1016/j.matpr.2020.10.309. [Paper Presented] [SCOPUS] Hassan F., Kanakaraju V., Rathinam K. and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning PART B: Influence of cutting tool chamfer angle and chamfer width”, accepted on 18 September 2020, Materials today proceedings (Elsevier), Volume 44, Part 1, pp. 266 – 277, Available online 2 November 2020, doi: https://doi.org/10.1016/j.matpr.2020.09.464. [SCOPUS] Kanakaraju V., Hassan F., Rathinam and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning process Part I: Influence of cutting tool parting distance”, IOP Conf. Series: Materials Science and Engineering 872 (2020) 012085, IOP Publishing, doi:10.1088/1757-899X/872/1/012085. [SCOPUS] Gautam G.D., Singh k.p., Prajapati A. and Norkey G. (2020), “Design optimization of roll cage for formula one vehicle by using finite element analysis”, Materials today proceedings (Elsevier), 28, pp. 2068 – 2076, https://doi.org/10.1016/j.matpr.2020.03.052. [Elsevier] [SCOPUS]. Norkey, G., Dubey, A.K. and Agrawal, S. (2014), “Artificial Intelligence based Modeling and Optimization of Heat Affected Zone in Nd:YAG Laser Cutting of Duralumin Sheet” Journal of Intelligent & Fuzzy Systems (IOS Press), 27, pp. 1545 to 1555, DOI:10.3233/IFS-141121. [SCI] Norkey, G., Dubey, A.K. and Agrawal, S. (2013), “Optimization of Multiple Quality Characteristics in Laser Cutting of Difficult-to-laser-cut Material” Applied Mechanics and Materials, 390, pp. 621 to 625, DOI: 10.4028/www.scientific.net / AMM.390.621. [SCOPUS] Norkey, G., Dubey, A.K. and Agrawal, S. (2012), “Parameter Optimization in Laser Cutting of Aluminium alloy Sheet” International Journal of Mechatronics and Manufacturing Systems (Inder Science Publication), Vol.5, No. ¾, pp. 179 to 188, DOI:1504/IJMMS.2012.048227. [SCOPUS] Sharma V., Kalidasan, S. Jasvinder, and Norkey G. (2019), Characterization of magnetic field for a MR fluid using simulation and experimental approach”, AIP Conference Proceedings 2087, 020007 (2019); pp. 020007-1 to 020007-8, AIP Publishing 978-0-7354-1817-2, https://doi.org/10.1063/1.5095223. [SCOPUS] Gautam G.D., Norkey G, and Pandey A.K. (2017), “Mechanical Characterization of Kevlar-29 Fiber Reinforced Polymer Composite”, ELK Asia Pacific Journals Special Issue, 2017, pp. 203 to 206, ISBN: 978-93-85537-06-6. Shrivastava P., Norkey G., and Pandey A.K. (2017), “Taguchi Based Particle Swarm Optimization of Kerf Taper in Laser Cutting of Inconel-718 Sheet”, ELK Asia Pacific Journals Special Issue, pp. 221 to 226, ISBN: 978-93-85537-06-6. Gautam G.D., Kumar S., Khan I., and Norkey G. (2015), “Heat Affecting Zone Analysis of Polycarbonate in Laser Beam Machining Using Response Surface Methodology”, ELK Asia Pacific Journals Special Issue, ISBN: 978-81-930411-8-5. Shrivastava P, Norkey, G. and Saxena A.C. (2015), “Effects of thermal sparays WC mixed with Ni coating on three body abrasive wear behavior”, BLB-International Journal of Science & Technology (special issue), ISSN: 0976-3074, pp. 53 to 57. Singh, K.P. and Norkey, G. (2014), “Selection of Optimum Machining Parameters For EN31 Alloy Steel in CNC Turning Using Taguchi Method”, JUET Research Journal of Science and Technology, Volume 1 (2), ISSN: 2321 6026, pp. 179 to 188. Singh, K.P., Gautam, G.D., Rupesh Yadav, Lalit Bisht and Norkey, G. (2014), “Selection of Optimum Machining Parameters For EN36 Alloy Steel in CNC Turning Using Taguchi Method”, International Journal of Scientific & Engineering Research, Volume 5 (3), ISSN: 2229 5518, pp. 976 to 982. Singh, K.P., Panul S., Gautam, G.D. and Norkey, G., (2014), “Parametric Analysis of Cutting Parameters for Laser Beam Machining Based on Box-behnken Design”, International Journal of Advanced Mechanical Engineering, 4 (1), ISSN 2250-3234, pp. 61 to 68. Singh, K.P., Gautam, G.D. and Norkey, G. (2013), “Optimization of Cutting Parameter for Surface Roughness in Dry Machining of EN 9 Alloy Steel Using Taguchi Method”, International Journal of Mechanical Engineering & Research, 3 (6), ISSN: 2249 0019, pp. 410 to 413. Norkey G. (2018), “Investigation of laser parameters in Al sheet”, JETIRDQ06035, Journal of Emerging Technologies and Innovative Research (JETIR), 5 (10), ISSN: 2349 – 5162. [UGC approved Journal] Norkey G. (2019), “Laser drilling by Nd:YAG of composites : A Review”, JETIRDY06270, Journal of Emerging Technologies and Innovative Research (JETIR), 6 (1), ISSN: 2349 – 5162. [UGC approved Journal]   National Conferences Attended / Presented Papers Dubey, A.K. and Norkey, G. (2010), “Experimental Investigation of Laser Cutting of Highly Reflective and Thermally Conductive Material”, National Conference on Recent Advances in Manufacturing, V.N.I.T, July 19 – 21, 2010, Surat, PP. 386 to 391, ISBN: 978-93-80697-05-5. Norkey, G., Dubey, A.K. and Agrawal, S. (2014) “Theoretical Investigations in Laser Cutting: A Review”, Proceedings of National Conference on Research and Innovation in Mechanical Engineering (RIME - 14), March 05-06, 2014, TIT Bhopal, PP. 103 – 111, Norkey, G., Chandratery, A. and Singh, K.P. (2014) “An Analysis the Effect of Process Parameters of Aluminium Sand Casting Taguchi's Method”, Innovation in Futuristic Materials & Manufacturing Techniques (IFMMT-2014)”, School of Engineering & Technology, Faculty of Engineering, Manipal University Jaipur.     International Conferences Attended / Presented Papers Kanakaraju V., Hassan F., Rathinam K and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning process Part I: Influence of cutting tool parting distance”, the Second International Conference on Materials Science and Manufacturing Technology 2020 (ICMSMT 2020) held at Hotel Aloft, Coimbatore, Tamil Nadu, India during 09 - 10, April 2020, organized by Sri Shakthi Institute of Engineering and Technology. [Paper Presented] Gautam G.D., Singh k.p., Prajapati A. and Norkey G. (2020), “Design optimization of roll cage for formula one vehicle by using finite element analysis”, the Second International Conference on Advances in Mechanical Engineering and Nanotechnology(ICAMEN 2020) held at Department of Mechanical Engineering at Manipal University, Jaipur, India during February 28 -29, 2020. [Paper Presented] Norkey G., Sharma V. and Kalidasan R. (2021), “Analytical determination of rheological parameters of MR fluids” International conference on Advances in Sustainable Technologies (ICAST 2020), School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India, 6th – 7th November, 2020, published in Recent Trends in Engineering Design, Lecture Notes in Mechanical Engineering (LNME) Springer, pp. 11 -18, https://doi.org/10.1007/978-981-16-1079-0_2. [SCOPUS]. Singh K. ,  Norkey G and Gautam G.D. (2021), “Parametric Optimization of Hole Quality In Laser Drilling Kevlar/Basalt Hybrid FRP Composite” International conference on Advances in Sustainable Technologies (ICAST 2020), 6th – 7th November, 2020, published in Recent Trends in Engineering Design, Lecture Notes in Mechanical Engineering (LNME) Springer, pp. 11 -18,  https://doi.org/10.1007/978-981-16-1079-0_2. [SCOPUS].  [Paper Presented] Sharma, Kalidasan, Norkey G., P. Swastik, and S. Mukhtiyar (2019), “Optimization and Characterization of Low Cost MR Fluid”, International conference on Innovative Technologies in Mechanical Engineering (ITME 2019),18th – 19th October 2019, Sponsored by AICTE, Organized by Department of Mechanical Engineering, KIET Group of Institution, Ghaziabad (U.P.), Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp 269-273, https://doi.org/10.1007/978-981-15-8704-7_33, Online ISBN978-981-15-8704-7. [SCOPUS].  [Paper Presented] Norkey G., Singh, K. P., Prajapati, A. and Sharma, V. (2019), “Intelligent parameters optimization for laser cutting of highly reflective and thermally conductive materials using Artificial Neural Network” 4th International conference on advances in materials and manufacturing applications (IconAMMA), Amrita Vishwa Vidyapeetham, Department of Mechanical Engineering, Amrita school of Engineering, Bengaluru Campus, Banglore, 29th – 31th August, 2019, paper_Id_IConAMMA_2019_184. [Paper Presented] Sharma V., Kalidasan, S. Jasvinder, and Norkey G. (2019), “Characterization of magnetic field for a MR fluid using simulation and experimental approach”, International Conference of Inventive Research in Material Science and Technology (ICIRMCT 2019),organized by RVS technical campus and Inventive Research Organization during January 30-31, 2019, at hotel Arcadia, Coimbatore, Tamilnadu, India. [Paper Presented] Norkey G., Singh G., (2019), “Optimizing laser machining parameters while cutting aerospace materials using genetic algorithms” 6th International Conference Production and Industrial Engineering (CPIE), Dr B. R. Ambedkar National Institute of Technology, Jalandhar, India, 08 – 10 June, 2019. [Paper Presented] Shrivastava, P., Norkey, G. and Pandey A.K. (2016), “Modelling and Optimization of Kerf Deviation in Laser Cutting of Inconel 718 Sheet”, Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016),  College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 515 to 519, ISBN: 978  93  86256  27  [Paper Presented] Gautam, G.D., Norkey, G. and Pandey A.K. (2016), “Optimization and Intelligent Modeling of Aluminum Sand Casting Process Parameters Using Multiple Computer Aided Techniques” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2016), College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 1937 – 1941, ISBN: 978 – 93 – 86256 – 27 – 0. Kumar, S., Shrivastava, Y., Singh, B. and Norkey, G. (2016), “Chatter Detection and Quantification using Hybrid Computational Approach” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 728 – 732, ISBN: 978 – 93 – 86256 – 27 – 0. Kumar, S., Singh, B. and Norkey, G. (2017), “Simulation of Tool Chatter in Turning Process” Proceeding of International Conference on Manufacturing Technology and Simulation (ICMTS - 2017), Department of Mechanical Engineering, IIT Madras, Chennai, Tamil Nadu, India, July 7 – 8, 2017, PP. 73 – 76, ISBN: 978-93-80689-26-5. Singh, K.P., Gautam, G.D., Tiwari S.K. and Norkey, G. (2013), “Optimization of Turning Parameters for Hardness of EN 9 Steel and Aluminium using Taguchi Technique” 2nd International Conference on Advanced Manufacturing and Automation (INCAMA), 164, PP. 876 – 882. Norkey, G. Optimization of Process Parameters during the Laser Cutting of Inconel 718 sheet using Regression Based Genetic Algorithm, International Conference on Advances in Materials and Manufacturing Engineering (ICAMME), 22nd to 24th January, 2018, Organized by Department of Mechanical Engineering, University of Engineering & Technology, Acharya Nagarjuna University, Guntur District, Andhra Pradesh, India.
  • Workshop/Conference/Organized/Attended: Number of Conference Organized :    01 International Conference (Convener) I have organized an International Conference in the School of Mechanical Engineering named “International Conference on Advances in Sustainable Technologies (ICAST) from November 6 to 7, 2020” at Lovely Professional University, Phagwara, Punjab, India. Number of STTP Organized:             01    Committee Member [Certificate of Appreciation] One week online AICTE sponsored STTP programme on “Advances in Manufacturing Systems” has been organized by the Department of Mechanical Engineering from June 25 -30, 2021 at MITS Gwalior (MP).
  • Complete Resume:   RESUME Objective To achieve a responsible and challenging position in organization, where I get opportunity to bring out the best of my creativity, talent and technical knowledge. Name                                       :           Dr. Gavendra Norkey Father’s Name                         :           Shri Ramswaroop Norkey Date of Birth                           :           13 / 05 / 1975 Nationality                             :            Indian Address for communication  :            O-4/54, Sai Villa, Shatabdipuram Phase-II, DD Nagar, Gwalior (MP) - 474020 E-Mail                                     :           This email address is being protected from spambots. You need JavaScript enabled to view it., This email address is being protected from spambots. You need JavaScript enabled to view it.,         Mobile No.                              :           8770541940,       09406989347      Permanent Address                 :           O-4/54, Sai Villa, Shatabdipuram Phase-II, DD Nagar, Gwalior (MP) - 474020 Language Known                    :          English, Hindi Academic Qualifications   Degree/certificate Year Institute/Board CGPA/Marks (%) Grade/Div. B.E. (Mechanical) 1999 M.I.T.S., Gwalior 65.25 % 1st Div. M.Tech (Production Engineering) 2005 M.I.T.S., Gwalior 74.66 % 1st Div. Ph.D. Mechanical Engg. (Laser Beam Cutting) 2014 JUET,  Guna   Awarded, 2014 My Ph.D. dissertation is entitled “Optimization and experimental modeling of quality characteristics for difficult to laser cut aluminium alloy sheets”. Details of experience (Teaching + Industry) : 20 years   S. No. Position From To Organization Remarks 1. Associate Professor 09/07/2018 30/04/2021 Lovely Professional University (LPU), Phagwara, Punjab Organized an International Conference as a Convener (ICAST 2020) 2. Assistant Professor (SG) 08/01/2007 26/05/2018 Jaypee University of Engg. & Technology, Guna [MP] Founder man of MED,   Warden (2010), UDC, NAAC member (University), Dept. Time Table In-charge, Course structure design, MED labs development, Department lab equipments purchasing In-charge etc.  3. Lecturer (Mech. Engg. Dept.) 11/08/2006 07/01/2007 HCST, Farah, Mathura (SGI GROUP) Recommended for Sr. Lecturer & Coordinator of MESA 4. Lecturer (-do-) 08/08/2005 10/08/2006 ITM, Gwalior Worked as a CAD/CAM training centre coordinator (with IGTR Indore) 5. Lecturer (-do-) 21/08/2004 06/08/2005 SRCEM, Gwalior   6. Purchase Officer [Industry] 01/06/2004 20/08/2004 Krishna Cables, Gwalior   7. Lecturer (-do-) 05/10/2001 29/07/2003 MITS, Gwalior   8. GEA (Mech. Dept.) [Industry] 01/04/2000 31/03/2001 Gujarat State Fertilizers & Chemicals Ltd., Jamnagar, Gujarat     Industrial Experience                                   :                01 Year S. No. Position From To Organization Remarks   1. Purchase Officer [Industry] 01/06/2004 20/08/2004 Krishna Cables, Gwalior No certificate   2. GET (Mech. Dept.) [Industry] 01/04/2000 31/03/2001 Gujarat State Fertilizers & Chemicals Ltd., Jamnagar, Gujarat           Details of Publications International Journal Prajapati A., Norkey G. and Gautam G.D., Optimization of heat affected zone in laser cutting of Kevlar-29 fiber composite using hybrid response surface based grey wolf optimization (RSGWO) algorithm” Published in Proc IMechE Part C: J Mechanical Engineering Science 2022, Vol. 0(0) 1–17, DOI: 10.1177/09544062221096557. [SCI]   Singh K.P., Bahl A., Norkey G and Gautam G.D. (2021), “Experimental investigation and parametric optimization of the hole circularity and taper angle during laser drilling kevlar-29 fiber composite” published in Materials today proceedings (Elsevier), https://doi.org/10.1016/j.matpr.2021.10.155 2214-7853. [SCOPUS] Norkey G., Singh, K. P., Prajapati, A. and Sharma, V. (2021), “ Intelligent parameters optimization for laser cutting of highly reflective and thermally conductive materials using Artificial Neural Network” published in Materials today proceedings (Elsevier), Volume 46, pp. 4757 – 4764, 2021 Available online 25 February 2021, https://doi.org/10.1016/j.matpr.2020.10.309. [Paper Presented] [SCOPUS] Hassan F., Kanakaraju V., Rathinam K. and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning PART B: Influence of cutting tool chamfer angle and chamfer width”, accepted on 18 September 2020, Materials today proceedings (Elsevier), Volume 44, Part 1, pp. 266 – 277, Available online 2 November 2020, doi: https://doi.org/10.1016/j.matpr.2020.09.464. [SCOPUS] Kanakaraju V., Hassan F., Rathinam and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning process Part I: Influence of cutting tool parting distance”, IOP Conf. Series: Materials Science and Engineering 872 (2020) 012085, IOP Publishing, doi:10.1088/1757-899X/872/1/012085. [SCOPUS] Gautam G.D., Singh k.p., Prajapati A. and Norkey G. (2020), “Design optimization of roll cage for formula one vehicle by using finite element analysis”, Materials today proceedings (Elsevier), 28, pp. 2068 – 2076, https://doi.org/10.1016/j.matpr.2020.03.052. [Elsevier] [SCOPUS]. Norkey, G., Dubey, A.K. and Agrawal, S. (2014), “Artificial Intelligence based Modeling and Optimization of Heat Affected Zone in Nd:YAG Laser Cutting of Duralumin Sheet” Journal of Intelligent & Fuzzy Systems (IOS Press), 27, pp. 1545 to 1555, DOI:10.3233/IFS-141121. [SCI] Norkey, G., Dubey, A.K. and Agrawal, S. (2013), “Optimization of Multiple Quality Characteristics in Laser Cutting of Difficult-to-laser-cut Material” Applied Mechanics and Materials, 390, pp. 621 to 625, DOI: 10.4028/www.scientific.net / AMM.390.621. [SCOPUS] Norkey, G., Dubey, A.K. and Agrawal, S. (2012), “Parameter Optimization in Laser Cutting of Aluminium alloy Sheet” International Journal of Mechatronics and Manufacturing Systems (Inder Science Publication), Vol.5, No. ¾, pp. 179 to 188, DOI:1504/IJMMS.2012.048227. [SCOPUS] Sharma V., Kalidasan, S. Jasvinder, and Norkey G. (2019), Characterization of magnetic field for a MR fluid using simulation and experimental approach”, AIP Conference Proceedings 2087, 020007 (2019); pp. 020007-1 to 020007-8, AIP Publishing 978-0-7354-1817-2, https://doi.org/10.1063/1.5095223. [SCOPUS] Gautam G.D., Norkey G, and Pandey A.K. (2017), “Mechanical Characterization of Kevlar-29 Fiber Reinforced Polymer Composite”, ELK Asia Pacific Journals Special Issue, 2017, pp. 203 to 206, ISBN: 978-93-85537-06-6. Shrivastava P., Norkey G., and Pandey A.K. (2017), “Taguchi Based Particle Swarm Optimization of Kerf Taper in Laser Cutting of Inconel-718 Sheet”, ELK Asia Pacific Journals Special Issue, pp. 221 to 226, ISBN: 978-93-85537-06-6. Gautam G.D., Kumar S., Khan I., and Norkey G. (2015), “Heat Affecting Zone Analysis of Polycarbonate in Laser Beam Machining Using Response Surface Methodology”, ELK Asia Pacific Journals Special Issue, ISBN: 978-81-930411-8-5. Shrivastava P, Norkey, G. and Saxena A.C. (2015), “Effects of thermal sparays WC mixed with Ni coating on three body abrasive wear behavior”, BLB-International Journal of Science & Technology (special issue), ISSN: 0976-3074, pp. 53 to 57. Singh, K.P. and Norkey, G. (2014), “Selection of Optimum Machining Parameters For EN31 Alloy Steel in CNC Turning Using Taguchi Method”, JUET Research Journal of Science and Technology, Volume 1 (2), ISSN: 2321 6026, pp. 179 to 188. Singh, K.P., Gautam, G.D., Rupesh Yadav, Lalit Bisht and Norkey, G. (2014), “Selection of Optimum Machining Parameters For EN36 Alloy Steel in CNC Turning Using Taguchi Method”, International Journal of Scientific & Engineering Research, Volume 5 (3), ISSN: 2229 5518, pp. 976 to 982. Singh, K.P., Panul S., Gautam, G.D. and Norkey, G., (2014), “Parametric Analysis of Cutting Parameters for Laser Beam Machining Based on Box-behnken Design”, International Journal of Advanced Mechanical Engineering, 4 (1), ISSN 2250-3234, pp. 61 to 68. Singh, K.P., Gautam, G.D. and Norkey, G. (2013), “Optimization of Cutting Parameter for Surface Roughness in Dry Machining of EN 9 Alloy Steel Using Taguchi Method”, International Journal of Mechanical Engineering & Research, 3 (6), ISSN: 2249 0019, pp. 410 to 413. Norkey G. (2018), “Investigation of laser parameters in Al sheet”, JETIRDQ06035, Journal of Emerging Technologies and Innovative Research (JETIR), 5 (10), ISSN: 2349 – 5162. [UGC approved Journal] Norkey G. (2019), “Laser drilling by Nd:YAG of composites : A Review”, JETIRDY06270, Journal of Emerging Technologies and Innovative Research (JETIR), 6 (1), ISSN: 2349 – 5162. [UGC approved Journal]   National Conferences Attended / Presented Papers Dubey, A.K. and Norkey, G. (2010), “Experimental Investigation of Laser Cutting of Highly Reflective and Thermally Conductive Material”, National Conference on Recent Advances in Manufacturing, V.N.I.T, July 19 – 21, 2010, Surat, PP. 386 to 391, ISBN: 978-93-80697-05-5. Norkey, G., Dubey, A.K. and Agrawal, S. (2014) “Theoretical Investigations in Laser Cutting: A Review”, Proceedings of National Conference on Research and Innovation in Mechanical Engineering (RIME - 14), March 05-06, 2014, TIT Bhopal, PP. 103 – 111, Norkey, G., Chandratery, A. and Singh, K.P. (2014) “An Analysis the Effect of Process Parameters of Aluminium Sand Casting Taguchi's Method”, Innovation in Futuristic Materials & Manufacturing Techniques (IFMMT-2014)”, School of Engineering & Technology, Faculty of Engineering, Manipal University Jaipur.     International Conferences Attended / Presented Papers Kanakaraju V., Hassan F., Rathinam K and Norkey G. (2020), “Numerical analysis of surface integrity in parallel turning process Part I: Influence of cutting tool parting distance”, the Second International Conference on Materials Science and Manufacturing Technology 2020 (ICMSMT 2020) held at Hotel Aloft, Coimbatore, Tamil Nadu, India during 09 - 10, April 2020, organized by Sri Shakthi Institute of Engineering and Technology. [Paper Presented] Gautam G.D., Singh k.p., Prajapati A. and Norkey G. (2020), “Design optimization of roll cage for formula one vehicle by using finite element analysis”, the Second International Conference on Advances in Mechanical Engineering and Nanotechnology(ICAMEN 2020) held at Department of Mechanical Engineering at Manipal University, Jaipur, India during February 28 -29, 2020. [Paper Presented] Norkey G., Sharma V. and Kalidasan R. (2021), “Analytical determination of rheological parameters of MR fluids” International conference on Advances in Sustainable Technologies (ICAST 2020), School of Mechanical Engineering, Lovely Professional University, Phagwara, Punjab, India, 6th – 7th November, 2020, published in Recent Trends in Engineering Design, Lecture Notes in Mechanical Engineering (LNME) Springer, pp. 11 -18, https://doi.org/10.1007/978-981-16-1079-0_2. [SCOPUS]. Singh K. ,  Norkey G and Gautam G.D. (2021), “Parametric Optimization of Hole Quality In Laser Drilling Kevlar/Basalt Hybrid FRP Composite” International conference on Advances in Sustainable Technologies (ICAST 2020), 6th – 7th November, 2020, published in Recent Trends in Engineering Design, Lecture Notes in Mechanical Engineering (LNME) Springer, pp. 11 -18,  https://doi.org/10.1007/978-981-16-1079-0_2. [SCOPUS].  [Paper Presented] Sharma, Kalidasan, Norkey G., P. Swastik, and S. Mukhtiyar (2019), “Optimization and Characterization of Low Cost MR Fluid”, International conference on Innovative Technologies in Mechanical Engineering (ITME 2019),18th – 19th October 2019, Sponsored by AICTE, Organized by Department of Mechanical Engineering, KIET Group of Institution, Ghaziabad (U.P.), Recent Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. pp 269-273, https://doi.org/10.1007/978-981-15-8704-7_33, Online ISBN978-981-15-8704-7. [SCOPUS].  [Paper Presented] Norkey G., Singh, K. P., Prajapati, A. and Sharma, V. (2019), “Intelligent parameters optimization for laser cutting of highly reflective and thermally conductive materials using Artificial Neural Network” 4th International conference on advances in materials and manufacturing applications (IconAMMA), Amrita Vishwa Vidyapeetham, Department of Mechanical Engineering, Amrita school of Engineering, Bengaluru Campus, Banglore, 29th – 31th August, 2019, paper_Id_IConAMMA_2019_184. [Paper Presented] Sharma V., Kalidasan, S. Jasvinder, and Norkey G. (2019), “Characterization of magnetic field for a MR fluid using simulation and experimental approach”, International Conference of Inventive Research in Material Science and Technology (ICIRMCT 2019),organized by RVS technical campus and Inventive Research Organization during January 30-31, 2019, at hotel Arcadia, Coimbatore, Tamilnadu, India. [Paper Presented] Norkey G., Singh G., (2019), “Optimizing laser machining parameters while cutting aerospace materials using genetic algorithms” 6th International Conference Production and Industrial Engineering (CPIE), Dr B. R. Ambedkar National Institute of Technology, Jalandhar, India, 08 – 10 June, 2019. [Paper Presented] Shrivastava, P., Norkey, G. and Pandey A.K. (2016), “Modelling and Optimization of Kerf Deviation in Laser Cutting of Inconel 718 Sheet”, Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016),  College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 515 to 519, ISBN: 978  93  86256  27  [Paper Presented] Gautam, G.D., Norkey, G. and Pandey A.K. (2016), “Optimization and Intelligent Modeling of Aluminum Sand Casting Process Parameters Using Multiple Computer Aided Techniques” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR- 2016), College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 1937 – 1941, ISBN: 978 – 93 – 86256 – 27 – 0. Kumar, S., Shrivastava, Y., Singh, B. and Norkey, G. (2016), “Chatter Detection and Quantification using Hybrid Computational Approach” Proceedings of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering, Pune, Maharashtra, India, December 16 – 18, 2016, PP. 728 – 732, ISBN: 978 – 93 – 86256 – 27 – 0. Kumar, S., Singh, B. and Norkey, G. (2017), “Simulation of Tool Chatter in Turning Process” Proceeding of International Conference on Manufacturing Technology and Simulation (ICMTS - 2017), Department of Mechanical Engineering, IIT Madras, Chennai, Tamil Nadu, India, July 7 – 8, 2017, PP. 73 – 76, ISBN: 978-93-80689-26-5. Singh, K.P., Gautam, G.D., Tiwari S.K. and Norkey, G. (2013), “Optimization of Turning Parameters for Hardness of EN 9 Steel and Aluminium using Taguchi Technique” 2nd International Conference on Advanced Manufacturing and Automation (INCAMA), 164, PP. 876 – 882. Norkey, G. Optimization of Process Parameters during the Laser Cutting of Inconel 718 sheet using Regression Based Genetic Algorithm, International Conference on Advances in Materials and Manufacturing Engineering (ICAMME), 22nd to 24th January, 2018, Organized by Department of Mechanical Engineering, University of Engineering & Technology, Acharya Nagarjuna University, Guntur District, Andhra Pradesh, India. Short Term Courses / Training Courses / Attended/Delivered Lectures I have successfully contributed as a Member of Organizing Team in AICTE sponsored one week online short term training program on “Advances in Manufacturing Systems” I have participated in the webinar titled Education 4.0 : Reliability Centered Maintenance organized (online mode) by the School of Mechanical Engineering, Vellore Institute of Technology (VIT) Chennai on 19th July 2020. I have participated in the Short Term Course on Industry 4.0 organized (online mode) by Lovely Professional University, Phagwara, Punjab from September 14, 2020 – September 18, 2020. I have participated in one week workshop on “Sustainable Energy: Challenges and Opportunities” organized (online mode) by Department of Electrical Engineering under Technical Education Quality Improvement Program (TEQIP –III), during 19th Oct – 23rd Oct, 2020 at Government Women Engineering College, Ajmer, Rajasthan, India. I have participated in the webinar on Global Panel Discussion on “Education 4.0: The Revolution” to celebrate national technology day on May 11, 2020 organized by skill faculty of engineering and technology at Shri Vishwakarma Skill University, Gurugram, Haryana, India. The self financed short term course on Advanced Machining Processes, MNNIT, Allahabad during July 01- 05, 2013. Indo US Engineering Faculty Leadership Institute, “Mechanical Engineering Drawing using CAD & Civil Engineering Drawing using CAD” during June 22 – 26, 2009 at Global Education Center, Infosys Technologies Ltd., Mysore. [IUCEE Program] International seminar on cement and building materials 04 days from 27.11.07 to 30.11.07, organized by NCCBM, The Ashok Hotel, New Delhi. Course on Renewable Energy as part of the IUCEE Programs 2012 at Jaypee University of Engineering & Technology, Guna (MP), India from 04 – 08 June, 2012. [IUCEE Program] Course on Numerical Methods as part of the IUCEE Programs 2011 at Jaypee University of Engineering & Technology, Guna (MP), India from 04 – 08 July, 2011. [IUCEE Program] Workshop on the theme of Energy Efficiency and Energy Conservation during Energy Conservation Week from 16th – 20th Dec, 2019 at LPU organized by Punjab Energy Development Agency (PEDA) and Design 2 occupancy services LLP, Jaipur. Training course on UniSim Design Simulation Software conducted by JRD TATA Automation Training Centre Honeywell Automation, Pune India Limited from 15/12/2010 to 17/12/2010. Two-day’s workshop on “Introduction to Robotics” conducted by E-Yantra, IIT Bombay on 26th and 27th October 2018 held at Lovely Professional University, Phagwara, Punjab, India, Training on Solid Works CAD Expert during December 16 – 18, 2016 and April 1 – 2, 2017. Certificate of Appreciation in recognition of the contribution as session chair in International Conference on Functional Materials, Manufacturing and Performances (ICFMMP – 2019) held on September 12 – 13, 2019 organized by School of Mechanical Engineering at Lovely Professional University, Punjab, India.   Certificate of Appreciation in recognition of the contribution as Campus Hostel Accommodation Committee in organizing the 106th Indian Science Congress – “Future India: Science & Technology” held from 3rd to 7th of January 2019 at Lovely Professional University, Punjab, India. Participated in one week online Faculty Development Program on Futuristic Trends in Energy, Material and Manufacturing Technology, organized by Department of Mechanical Engineering, Hindustan College of Science & Technology, Mathura from 02-08-2021 to 06-08-2021. Manufacture of cement 10 days from1.06.07 to 10.06.07 JIIT NOIDA. Short Term Course on cement production & quality Control 10 days from 24.12.07 to 03.01.08, organized by Jaypee Cement. Short Term Course on cement production & quality Control 10 days from 07.01.08 to 17.01.08, organized by Jaypee Cement. Short Term Course on cement production & quality Control 10 days from 30.01.08 to 09.02.08, organized by Jaypee Cement. Training for Technical Sales Officers, 7 weeks 24.07.08 to 10.09.08 organized by Jaypee Cement. NPTEL Online Certification: I have completed a 12 week (Jan – March 2022) course on “Introduction to Machining and Machining Fluids”. [Elite Certificate] I have completed an 8 week (Jan – March 2022) course on “Introduction to Abrasive Machining and Finishing Processes”. [Elite Certificate] I have completed a 12 week (Jan – April 2022) course on “Manufacturing Process Technology I and II”. [Elite Certificate] I got top performing mentor certificate of “Introduction to Abrasive Machining and Finishing Processes” course (Jan – April 2022). I have completed an 8 week (Aug – Oct 2021) course on “Advanced Machining Processes”. I have completed a 12 week (July – Oct 2021) course on “Manufacturing Systems Technology I and II”. I have completed a 12 week (Jul – Oct 2018) course on “Fundamental of Manufacturing Processes”. I have completed a 12 week (Jan – Apr 2020) course on “Manufacturing Process Technology I and II” with score 94% (continuous online assessment score). Expert Lecture I have delivered expert lecture on “Laser Beam Machining” under dated 16/08/2020 in one week self – sponsored online workshop on “Advancements in Materials and Manufacturing Systems (AMMS – 2020)” organized by Department of Mechanical Engineering at Maulana Azad National Institute of Technology (MANIT), Bhopal, M.P., India, held during 13th – 17th , August 2020. Member of Advisory Board Department of Mechanical Engineering of Mangalmay Institute of Engineering and Technology (MIET), Greater Noida, U.P. has been nominated as a member of Advisory Board of Mechanical Engineering on 19th November 2020. Number of STTP Organized:             01    Committee Member [Certificate of Appreciation] One week online AICTE sponsored STTP programme on “Advances in Manufacturing Systems” has been organized by the Department of Mechanical Engineering from June 25 -30, 2021 at MITS Gwalior (MP). Number of Conference Organized :    01 International Conference (Convener) I have organized an International Conference in the School of Mechanical Engineering named “International Conference on Advances in Sustainable Technologies (ICAST) from November 6 to 7, 2020” at Lovely Professional University, Phagwara, Punjab, India. Book Publication:      01 [Lecture Notes in Mechanical Engineering, Springer]                    https://doi.org/10.1007/978-981-16-3132-0  Any Other Information M.Tech. Thesis Supervision   M.Tech. Guide ---------------- 05 completed  (i) Shailendra Kumar (Er. No.102608), “To analyze the effect of process parameters on heat affected zone and surface roughness in laser cutting”, May 2012. (ii) Apoorva Chandratrey (Er. No. 122402), “Optimization of process parameters of aluminium  sand casting using Taguchi Method”, May 2014. (iii) Kaushal Pratap Singh (Er. No. 092601), “Optimization of process parameters for surface roughness and MRR in CNC turning of EN 9 alloy steel using Taguchi method”, December 2014. (iv) Ishan Khan (Er. No. 142404), “Modeling and optimization of surface roughness in turning of EN36 alloy steel using Response Surface Methodology and Genetic Algorithm”, May 2016. (V) Akanksha Prajapati (Er. No. 11813319), “Laser beam machining of FRP composite materials”, November 2020. Ph.D. Thesis Supervision:               01 Completed      [Awarded on 31/12/2018] (i) Prashant Kumar Shrivastava (Er. No. 143202), “An optimal solution of parameters for machining of Inconel -718”, being supervised by Dr. Gavendra Norkey and Dr. Arun Kumar Pandey. (ii) Prashant Kumar Shrivastava (Er. No. 143202), got “Young Scientist Award” in the discipline of Mechanical Engineering for his outstanding research paper presented during 33rd M.P. Young Scientist Congress (March 15 – 16, 2018) held at Rani Durgavati Vishwavidyalaya, Jabalpur under M.P. Council of Science and Technology, Vigyan Bhawan, Nehru Nagar, Bhopal (MP).  Ph.D. Thesis Supervision:                02    Pursuing Ph.D. at Lovely Professional University Student Name        :                Kaushal Pratap Singh (Er. No. 41800893)  Proposed Title of Research:  Analysis of Hole Quality in Laser Drilling of FRP Composite STATUS:                               Pre – submission is done on 30/06/2022 Student Name           :             Survesh Kumar Tiwari (Er. No. 42000374) Proposed Area of Research:               Laser Beam Machining Member of Professional Bodies: Member of IAENG (International Association of Engineers). Life time membership of Indian Laser Association (ILA). Reviewer: Expert system, Wiley publications, JIFS, Reviewer in International Conference on “Simulation, Automation & Smart Manufacturing (SASM – 2021), Organized by Department of Mechanical Engineering, GLA University, Mathura held at 20 – 21 August, 2021. Elsevier, JIFS Technical Session Chaired: I have chaired the technical session in 4th International Conference on Advances in Mechanical Engineering and Nano Technology (ICAMEN 2022, February 18 - 19, 2022, Mechanical Engineering Department, Manipal University, Jaipur (Rajasthan). Courses Undertaken [In M.Tech] Fundamentals of research, Casting and Welding, Metal Machining, Advanced Engineering Materials, Machining of Advanced Engineering Materials, Robotics and Automation, Unconventional Manufacturing Processes, Computer Integrated Manufacturing etc. Extra – curricular Activities / Administrative Responsibilities handled: JUET Guna: Wardenship (2010), University Assistant Public Information Officer, University NAAC team member, Departmental labs development (Foundermen of Mechanical Engineering Department), Departmental labs equipments purchasing in-charge, Department course structure design, Departmental Time Table and teaching load coordinator, Departmental Faculty meeting secretary, Departmental member of student technical bodies, Departmental member of board of studies, Departmental member of syllabus modification committee.     ITM-Gwalior: CAD/CAM training center coordinator (with IGTR Indore), Departmental labs equipments purchasing in-charge, Departmental labs development etc.     NCC               :           A, B and C certificates + RDC certificate Strength Curious Confident Clear Thinking Team Work   Related Soft Skills: Operating Systems : Windows XP/ 7 Productivity/PC applications : MS Office, Excel, Programming languages : MS Excel, C, C++, UNIX       Computer Aided Design         : AUTOCAD, Pro-E References: Avanish Kumar Dubey, Professor, Department of Mechanical Engineering, MNNIT, Allahabad (UP) – 211004 Mob: 09336556602,                              E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Anand Parey, Professor, Department of Mechanical Engineering, Indian Institute of Technology (IIT) Indore, Khandwa Road, Simrol, Indore- 453552 Mob: 9425053943,                                 E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Professor J. N. Dube (Ex-Prof. IIT BHU), Visiting Professor IIT BHU, Department of Mechanical Engineering, Varanasi (UP) Mob: 09794530282,                                E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it. Sanat Agrawal, Associate Professor, Department of Mechanical Engineering, National Institute of Technology (NIT) Uttarakhand, Government Polytechnic, Srinagar (Garhwal), Uttarakhand-246174 Mob: 9669709504, 9406975218              E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it.   Place:   Gwalior (MP)                                                                                 (Dr. Gavendra Norkey)

Important Links

Get in Touch

Locate Us
View in Map

© . MITS Gwalior. All Rights Reserved.

Disclaimer / Privacy Policy / Sitemap

Design and Developed by CRISP