Dr. Manoj Kumar Gaur

Designation: Professor & Head
Qualification: Ph.D., IIT, Delhi M.Tech (Material Science), MANIT, Bhopal
Area of Interest: Solar Thermal
Phone No: 0751-2409312
E-Mail:

This email address is being protected from spambots. You need JavaScript enabled to view it.

About Faculty: Manoj Kumar Gaur is working as a Professor and Head in Mechanical Engineering Department, and Associate Proctor at Madhav Institute of Technology and Science, Gwalior, India. He has made substantial contributions to the fields of solar thermal energy, solar distillation, and heat and mass transfer applications. He possesses twenty one years teaching experience of Post Graduate and Under Graduate classes. He has authored three books titled “Solar Energy: Problems Solutions and Experiments”, “Optimization of machining parameters of hard porcelain on CNC machine” and “Solar Energy Systems: Thermal Analysis and Its Application”. More than hundreds of his papers have been published in various International and National journals and conferences. Under his supervision, one PhD is awarded, three PhDs are submitted and three are ongoing. He is an active Reviewer of prestigious Journal like Solar Energy, Desalination, Desalination and Water Treatment, Journal of Thermal Engineering etc. His broad area of interest includes thermodynamics, heat transfer, Solar Energy and Solar Distillation. He is a life member of the Indian Society for Technical Education (India), IET and Faculty Advisor of Society of Automotive Engineers INDIA MITS chapter. He attended one week summer school „UKERC‟ at university of Sussex, Brighton, U.K. in July, 2009. He had obtained Ph.D. from Indian Institute of Technology Delhi, New Delhi and Master of Technology in Engineering Materials from Maulana Azad National Institute of Technology Bhopal in 2002. He secured fifth position in the University in his Bachelor of Engineering in Mechanical Branch from Oriental Institute of Technology and Science, Bhopal in 1999.

Work Experience:

S. No.	Name of Post Held	Name of Employer	Date of Joining	Date of Leaving
1.	Professor	Madhav Institute of Technology & Science, Gwalior	22/12/2015	Till Date
2.	Associate Professor	Madhav Institute of Technology & Science, Gwalior	22/12/2012	21/12/2015
3.	Assistant Professor	Madhav Institute of Technology & Science, Gwalior	01/10/2010	21/12/2012
4.	Sr. Lecturer	Madhav Institute of Technology & Science, Gwalior	23/09/2008	30/09/2010
5.	Lecturer	Madhav Institute of Technology & Science, Gwalior	23/03/2003	22/09/2008
6.	Lecturer	OIST Bhopal	6/08/2001	20/09/2003

Administrative Experience:
1. Worked as Head of Mechanical & Automobile Engineering from May 01, 2021 to till now.
2. Working as Associate Proctor from January 16, 2019 to till now.
3. Working as Proctorial Board Member from January 31, 2019 to till now.
4. Worked as Head of Mechanical & Automobile Engineering from Jan 4, 2016 to Jan 1, 2018.
5. Worked as a member of Institute Purchase Committee from August 22, 2012 to March 21, 2017.
6. Worked as a member of TEQIP-II Central Purchase Committee from July 12, 2011 to March 31, 2016.
7. Worked as warden of girls hostel Blok 5 from July 2011 to Feb 16, 2016.
8. Worked as Professor Incharge Security from November 2015 to Jan 2016.
9. Currently working as faculty advisor of SAEINDIA MITS Chapter.
10. Worked as faculty advisor of ISTE student chapter MITS.
11. Class coordinator I^stE. Mechanical.
12. Member of central purchase committee.
13. Worked as active member of valuation team for BE/ME/MCA/ examination May 2011.
14. Appointed as DTE nominee for diploma counseling at CSMT, Takenpur, Gwalior July 12 -13, 2011.
15. Working as member of uniform committee for class IV employee of MITS
16. Worked as coordinator of invitation committee in PHONIX 2011.
17. Member of the committee formed by municipal commissioner Gwalior for solar city Gwalior
18. Worked as member of admission committee for BE/MCA/B Arch/Lateral entry admission 2010.
19. Worked as member of admission committee for M. Tech (PE& MH) admission 2010

Research Supervision:

Details of PhD Guidance

S. No.	Name of student(s)	University	Status
1.	Mr. Gaurav Saxena	RGPV, Bhopal	Awarded
2.	Mr. Pushpendra Singh	RGPV, Bhopal	Thesis Submitted
3.	Mr. Vikas Kumar Thakur	RGPV, Bhopal	Thesis Submitted
4.	Ms. Rishika Shah	RGPV, Bhopal	Thesis Submitted
5.	Mr. Vedansh Chaturvedi	RGPV, Bhopal	Pursuing
6.	Mr. Nagendra Sharma	RGPV, Bhopal	Pursuing
7.	Mr. Chandra Shekhar Koli	RGPV, Bhopal	Pursuing
8.	Mr. Dharmendra Mittal	RGPV, Bhopal	Pursuing

Details of Project/ Thesis Guidance

S. No.	Title of Thesis	Institute	Name of student(s)	Co-Supervisor(s)	Year
1.	Mr. Rajat Vidhyarthi	MITS Gwalior	Studies In Applications of Lasers In Production Engineering	Dr. D Pandey DRDE Gwalior Dr. K. C Arora, Professor MITS	2004
2.	Mr. Vivek Nanda	MITS Gwalior	Total Productive Maintenance – A Case Study on Jamna Auto Industries	-------------	2011
3.	Mr. Bijendra Gond	MITS Gwalior	Manufacturing and performance analysis of solar flat plate collector with phase change material	Dr. C S Malvi	2012
4.	Mr. Bhoopendra Bhadoria	MITS Gwalior	Manufacturing and Performance evaluation of Corrugated Polycarbonate Hybrid Solar Water Flat Plate Collector	Dr. C S Malvi	2012
5.	Richa Chauhan	MITS Gwalior	An integrated production and preventive maintenance planning model for an ageing and detoriating production systems with limited historical data		2013
6.	Awadhesh Ahirwar	MITS Gwalior	Strategic analysis for reliability of diesel locomotives in Indian Railways		2013
7.	Shashank Saxena	MITS Gwalior	Design of photovoltaic System for a biscuit Packaging Machine “ A small Scale Industry		2013
8.	Omprakash Mishra	MITS Gwalior	Two Stage Filtration System in Full Scale Boiling Water for Thermal Power Plant		2013
9.	Ranjeet	MITS Gwalior	Study on battery operated hybrid solar Vehicle	Dr. C S Malvi	2013
10.	Rohit Pandey	MITS Gwalior	Grid Connected Solar Photovoltaic Potential	Dr. C S Malvi	2013
11.	Akansha Kumra	MITS Gwalior	Study and Design of PV system for small Scale Cottage Industry at Gwalior		2012
12.	Jasveer Singh	MITS Gwalior	An approach for selection of process parameters of EDM on EN-353 steel by using Taguchi method and ANOVA		2014
13.	Pankaj Shrivastava	MITS Gwalior	Analysis of Barriers to implement green supply chain management in small scale industries using interpretive modeling techniques		2015
14.	Sourabh Agrawal	MITS Gwalior	Optimization of Machining parameters of hard porcelain on CNC machine by Taguchi and RSM method		2015
15.	Amrit Pal	MITS Gwalior	Study of Time Series Model Forecasting in Shoe Industries		2015
16.	Amit Kumar	MITS Gwalior	Time based optimization of Injection Molding Machine Process Parameters on PVC using GRA - RSM		2015
17.	Lalit Goud	MITS Gwalior	Scram Jet Combustor with Pylon Injector by computational Fluid Dynamics analysis		2015
18.	Madhvi Pathak	MITS Gwalior	Parameters optimization of Electrical Discharge Machining using TOPSIS and ANOVA		2016
19.	Gurjeet Kaur	MITS Gwalior	Optimization of Electric Discharge Machining Process Parameters of Stainless Steel 304 using GRA		2016
20.	Shivani Yadav	MITS Gwalior	Optimization of MRR & TWR on Electro discharge machine using Taguchi & ANOVA based GRA		2016
21.	Sandeep Tyagi	MITS Gwalior	Optimization of CNC Wire-Electrical Discharge Machining Parameters Using Response Surface Methodology based Genetic Algorithm		2016
22.	Sehdev Nayak	MITS Gwalior	Optimization of turning parameters of EN-36 for material removal rate and tool based on Taguchi and RSM method		2016
23.	Brij Mohan Sharma	MITS Gwalior	Response surface approach of optimization to study the effect of drilling parameter in AISI-304 stainless steel		2017
24.	Ajay Motwani	MITS Gwalior	Analysis of machining parameters in wire EDM with aluminium alloy using PCA and topsis approach		2017
25.	Dharmendra Singh Yadav	MITS Gwalior	Parametric optimization of TIG welding on AISI-304 stainless steel plate by Taguchi based RSM method		2017
26.	Ravi Bhardwaj	MITS Gwalior	Simultaneous optimization of multiple performance characteristics in MIG welding for AISI-304 stainless steel by weighted principle component analysis		2018
27.	Gajendra Arya	MITS Gwalior	Analysis and optimization of end milling machining parameter for polypropylene composite using taguchi based GRA		2018
28.	Vinay Bhardwaj	MITS Gwalior	Optimization of Machining Parameters for Nylon-6 Composition in CNC Lathe Using PCA-Based TOPSIS		2018
29.	Anil Kumar Sharma	MITS Gwalior	Analysis and optimization of varying surface grinding parameter for AISI- 1018 mild steel		2018
30.	Sonal Rajoria	MITS Gwalior	A computational study of natural gas combustor using viscous model	Prof. Swati Gupta	2019
31.	Sumit Mishra	MITS Gwalior	“Heat Recovery from metal casting using scrap preheating”		2019
32.	Harsh Vardhan Etondia	MITS Gwalior	A study on response parameters of Injection molding process for poly-propylene plastic using Grey Relational Analysis		2020
33.	Kaushal Pratap	MITS Gwalior	Multi Variable analysis and optimization of electrical discharge machining process using a PCA-ANN based Approach		2020

Workshop/Conference/Organized/Attended:

S. No.	Title	Duration	Level (National/International)
1.	TEQIP-III sponsored FDP on Renewable Energy Sources and Future Energy Needs from February 15 - 19, 2021 at MITS Gwalior	One Week	International
2.	Webinar on Building Science and Energy Conservation from September 22-26, 2020 at MITS Gwalior	One Week	National
3.	TEQIP-III sponsored Workshop on Building Envelope Design for Energy Optimization on September 07, 2020 at MITS Gwalior	One Day	National
4.	“Solar Energy Technologies” 25^thFeb to 1^stMarch 2019	One Week	National (GIAN Course)
5.	STC- TASESD (March 09 – March 18, 2019)	Two weeks	National (AICTE -QIP)
6.	FDP on “Solar Energy Applications” 1^st March - 11th March 2017	Two weeks	National (AICTE -QIP)
7.	FDP on Advances Manufacturing Systems Feb.16 -22 2017 (As Convener)	One Week	National
8.	(Workshop) Manufacturing Systems (TEQIP –II funded) , 24-25 Oct 2016	Two Days	National
9.	(Workshop) Vehicle Dynamics, Sept. 26 – 28, 2016 (MPCST Funded)	Three Days	National
10.	(Workshop) Finite Element Methods for Engineers, April 2 -4, 2016, (TEQIP –II funded), (As Convener)	Three Days	National
11.	(Workshop) Innovations in teaching and Research, March 26,2015	One Day	National
12.	SRIJAN-2019, a festival of Technical Papers & Innovative Models	One day	National
13.	Fluid Mechanics (May 20 – 30, 2014)	Two Weeks	National
14.	Hybrid Solar PVT Technologies (January 16- 17, 2014)	Two Days	National
15.	Engineering Thermodynamics (Dec. 11, 2012 –Dec. 21, 2012)	Two Weeks	National
16.	Alumni meet (Reunion 1979 batch) (October 20, 2012)	One Day	International
17.	Solar Energy Utilization (Sep. 15, 2004)	One Day	National
18.	Bio- Energy, Sept. 17, 2005 (As Faculty Advisor)	One Day	National
19.	Kshitiz April 30, 2005	One Day	National

Publications:
International Journal
1. Referred Journal
2. Singh P., Gaur M.K., Tiwari G.N., Kumar A. (2022) Thermal Modeling of Water-in-Tube Type Evacuated Tube Solar Collectors to Predict Outlet Water Temperature: An Experimental Validation, Journal of Solar Energy Engineering (Transaction of ASME), 145(2), 021004 https://doi.org/10.1115/1.4055075 (SCIE)
3. Kushwah A., Kumar A., Gaur M.K., Pal A. (2022) Performance analysis of heat exchanger- evacuated tube assisted drying system (HE-ETADS) under unload condition, Sustainable Energy Technologies and Assessments 53(2), 102589. https://doi.org/10.1016/j.seta.2022.102589 (SCIE)
4. Singh P., Gaur M.K. (2022) Novel Hybrid Active Greenhouse Solar Dryer with Evacuated Tube Solar Collector: Energy and Exergy Analysis, International Journal of Exergy, Accepted (In Production). (SCIE)
5. Thakur V.K., Gaur M.K. (2022) Energy and Exergy Analyses of Passive Solar Still Augmented with Nanoparticles, International Journal of Exergy, Accepted (In Production). (SCIE)
6. Gaur M.K., Thakur V.K. (2022) Experimental Analysis of Sustainability of Passive Solar Still with Nanoparticles Operating at Various Angles of Glass Cover, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(2), 5227-5245. https://doi.org/10.1080/15567036.2022.2082600 (SCI)
7. Shah R., Pandit R.K., Gaur M.K. (2022) Urban physics and outdoor thermal comfort for sustainable street canyons using ANN models for composite climate, Alexandria Engineering Journal, 61(12), 10871-10896. https://doi.org/10.1016/j.aej.2022.04.024 (SCIE)
8. Singh P., Gaur M.K, Malvi C.S. (2022) Effect of Drying Area on Heat Transfer Coefficient and Drying Kinetics of High Moisture Crop Dried in Hybrid Active Greenhouse Solar Dryer, Heat Transfer Research, 53(11), 79–97. https://doi.org/10.1615/HeatTransRes.2022040797 (SCIE)
9. Shrivastava A, Gaur M.K., Singh P. (2022), Mango leather (Aam Papad) drying in hybrid greenhouse solar dryer with evacuated tube collector and finned drying tray: drying behavior and economic analysis, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567036.2022.2029974 (SCI)
10. Kushwah A., Kumar A., and Gaur M.K. (2022), Drying kinetics, performance, and quality assessment for banana slices using heat pump–assisted drying system (HPADS), Journal of Food Process Engineering, 1-10. https://doi.org/10.1111/jfpe.13964 (SCIE)
11. Kushwah A, Gaur M.K., Kumar A., Singh P., (2022) Application of ANN and prediction of drying behavior of Mushroom drying in side hybrid greenhouse solar dryer: An experimental validation, Journal of Thermal Engineering, 8(2), 221-234. https://doi.org/10.14744/jten.2021.0006 (Scopus, ESCI)
12. Singh P., Gaur M.K, (2022) A Review on thermal analysis of hybrid greenhouse solar dryer (HGSD). Journal of Thermal Engineering, 8(1), 103-119. https://doi.org/10.18186/thermal.1067047 (Scopus, ESCI).
13. Thakur V.K., Gaur M.K., Dhamneya A.K. (2021) Validation of Thermal Models to Predict the Productivity and Heat Transfer Coefficients for Passive Solar Still with different Nanoparticles, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-21. https://doi.org/10.1080/15567036.2021.1971338 (SCI)
14. Thakur V.K., Gaur M.K., (2021) Heat and Mass Transfer Analysis of Passive Solar Still with Nanoparticles, Operating at Different Water Depth and Various Slope of Glass Cover, Desalination and Water Treatment, 1-25. doi:10.5004/dwt.2021.27627 (SCI)
15. Singh P., Gaur M.K, (2021) Sustainability Assessment of Hybrid Active Greenhouse Solar Dryer integrated with Evacuated Solar Collector, Current Research in Food Science, 4, 684-691. https://doi.org/10.1016/j.crfs.2021.09.011 (SCIE)
16. Singh P., Gaur M.K, (2021) Environmental and economic analysis of novel hybrid active greenhouse solar dryer with evacuated tube solar collector, Sustainable Energy Technologies and Assessments, 47 (2021), 101428. https://doi.org/10.1016/j.seta.2021.101428 (SCIE)
17. Singh P., Gaur M.K, (2021), Heat Transfer analysis of Hybrid active Greenhouse Solar dryer attached with evacuated tube solar collector. Solar Energy, 224, August 2021, 1178-1192. https://doi.org/10.1016/j.solener.2021.06.050 (SCIE)
18. Kushwah A., Kumar A., Gaur M.K., and Pal A. (2021) Garlic dehydration inside heat exchanger-evacuated tube assisted drying system: Thermal performance, drying kinetic and color index. Journal of Stored Products Research, 93, September 2021, 101852. https://doi.org/10.1016/j.jspr.2021.101852 (SCIE)
19. Singh P., Pandey B.K., Gaur M.K, (2021) Performance evaluation of evacuated solar collector assisted hybrid greenhouse solar dryer under active and passive mode, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.10.461 (Scopus)
20. Thakur V.K., Gaur M.K, (2021) Study the effect of CuO nanoparticles on the performance of passive solar still in winter and summer season, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.11.119 (Scopus)
21. Shah R., Pandit R.K., Gaur M.K, (2021) Thermal comfort analysis through development of artificial neural network models: An experimental study in Cwa climate, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.11.139 (Scopus)
22. Sharma N.K., Gaur M.K. and Malvi C.S. (2021) Application of phase change materials for cooling of solar photovoltaic panels: A review. Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.05.127 (Scopus)
23. Thakur V.K., Gaur M.K., Dhamneya A.K. and Sagar M.K. (2021) Performance Analysis of Passive Solar Still with and without nanoparticle. Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.05.539 (Scopus)
24. Kushwah A., Kumar A., Pal A., and Gaur M.K. (2021) Experimental analysis and thermal performance of evacuated tube solar collector assisted solar dryer. Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.04.243 (Scopus)
25. Singh P, Gaur M.K. (2020). Review on development, recent advancement and applications of various types of solar dryers, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, pp. 1–21, 2020. https://doi.org/10.1080/15567036.2020.1806951 (SCIE)
26. Thakur V.K, Gaur M.K, Sagar M.K, Tiwari G.N. (2021) A Study on Heat and Mass Transfer Analysis of Solar Distillation Systems, Journal of Thermal Engineering, Vol. 7, No. 5. 1184–1205. (Scopus, ESCI)
27. Gaur M. K., Tiwari G.N., Singh P., Kushwah A (2021), Heat Transfer Analysis of Hybrid Active Solar Still with Water Flowing over Glass Cover, Journal of Thermal Engineering, 7(6), 1329-1343. (Scopus, ESCI)
28. Saxena G., Gaur M.K. (2020) Performance Evaluation and Drying Kinetics for Solar Drying of Hygroscopic Crops in Vacuum Tube Assisted Hybrid Dryer, Journal of Solar Energy Engineering, 2020, 142(5):1-21. (SCI)
29. Saxena G., Gaur M.K. (2020) Energy, exergy and economic analysis of evacuated tube solar water heating system integrated with heat exchanger, Materials today: proceedings, 28(Part 4): 2452-2462. https://doi:10.1016/j.matpr.2020.04.793 (Scopus)
30. Kushwah A., Gaur M.K., Pandit R.K., Singh P. (2020) Material Thermal Performance Comparison Between The Tomb Of Mohammad Ghaus Heritage Building And A Modern Style Dwelling In Madhya Pradesh, International Journal of Built Environment and Sustainability. Vol. 7(2), 33-44. (ESCI)
31. Kushwah A., Gaur M.K., Pandit R.K. (2020) The Role of Phase Change Materials for Lifetime Heating of Buildings in Cold Climatic Conditions. International Journal of Built Environment and Sustainability. Vol. 7(33), 81-96. (ESCI)
32. Singh P. and Gaur M.K., Kushwah A., Tiwari G.N. (2019) Progress in hybrid greenhouse solar dryer (HGSD): A review, Advances in Energy Research, 6(2), 145-160, DOI: http://doi.org/10.12989/eri.2019.6.2.000 (ESCI)
33. Gaur, M.K., Tiwari, G.N., Singh. P., Kushwah, A. (2019) Development of Empirical Relations to Compute the Heat Transfer Coefficients for Distiller Operating in Different Operating Modes, Desalination and Water Treatment, Vol 158, 1-10. (SCI)
34. Pandit R.K., Gaur M.K., Kushwah A., Singh P., (2019) Comparing the thermal performance of ancient buildings and modern style housing constructed from local and modern construction materials, Nanotechnology Perceptions, 15, 174-182. doi: 10.4024/N12PA19L.ntp.15.02. (Scopus)
35. Saxena G. and Gaur M.K. (2018) Exergy analysis of evacuated tube solar collectors: a review, International Journal of Exergy, Vol. 25 (1), pp.54-74. (SCI)
36. Malvi S. ,Gupta A. , Gaur M.K., Crook R. and Dixon-Hardy D.W. (2017) Experimental investigation of heat removal factor in solar flat plate collector for various flow configurations, International Journal of Green Energy, Vol. 14 (4), 442-448. (SCI)
37. Singh A.P., Gaur, M.K., Kasdekar D., and Agrawal S. (2015) A Study of Time Series Model for Forecasting of Boot in Shoe Industry, International Journal of Hybrid Information Technology, Vol. 8(8), 143-152, DOI: 10.14257/ijhit.2015.8.8.13, ISSN:1738-9968 (Scopus: 2014 -2016)
38. Gaur, M. K., Tiwari, G.N. and Kumar S., (2011) Validation of thermal models to predict the heat and mass transfer coefficients for indoor simulation. Desalination and Water Treatment, 26, 201 – 210. (SCI)
39. Gaur, M. K. Tiwari, G.N., (2010). Optimization of number of collectors for hybrid active solar still, Applied Energy, 87, 1763-1772. (SCI)
40. Kumar, S. Tiwari, G.N., Gaur, M.K. (2010) Development of Empirical Relation to Evaluate the Heat Transfer Coefficients and Fractional Energy in Basin Type Hybrid (PV/T) Active Solar Still, Desalination, 250 (1), 214-221. (SCI)
41. Non Refereed but Recognized Journals having ISBN/ISSN Number/UGC
42. Singh P., Gaur M.K. Environmental and Economic analysis of hybrid greenhouse solar dryer: A Review, International Journal of energy Technology, 2(1). 55-69.
43. Thakur V.K., Gaur M.K. A study on passive solar still with nanoparticles, International Journal of energy Technology, 2(1), 26-38.
44. Etondia H.V., Gaur M.K., Kushwah A. (2020) “A Study on Response Parameters of Injection Moulding Process in Polypropylene Plastic using Grey Relational Analysis” Journal of Experimental & Applied Mechanics. Vol. 10(3), 30-39.
45. Sharma A, Gaur M.K., Agrawal S (2018) “Effect of Varying Surface Grinding Parameters for AISI 1018 Mild Steel by Taguchi based PCA” Journal of Catalyst & Catalysis Vol 5, (2), pp. 5-14.
46. Mishra S, Kushwah A, Gaur M.K. and Singh P (2018) “Scrap Preheating using Waste Heat in Metal Casting” Journal of Thermal Energy Systems Vol 3, (3), pp. 36-43.
47. Bharadwaj R, Gaur M.K., Agrawal S and Chaturvedi V (2018) “Simultaneous Optimization of Multiple Performance Characteristics in MIG Welding for Machining AISI-304 Stainless Steel by Weighted Principle Component Analysis” Journal of Experimental & Applied Mechanics Vol 9, (3), pp. 77-85.
48. Arya G, Gaur M.K. and Agrawal S (2018) “Analysis and Optimization of End Milling Machining Parameters for Polypropylene composite using Taguchi based GRA” International Journal of Trends in Mechanical Engineering & Technology Vol 8, (3), pp. 91 -100.
49. Bhardwaj V., Gaur, M.K.., Chaturvedi, V. and Agrawal, (2018) “Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS” International Journal of Manufacturing and Materials Processing Vol 4, (1), pp. 36 -47.
50. Agrawal S., Gaur, M.K., Kasdekar D., and Agrawal S. (2018). “Optimization of machining parameters of hard porcelain on a CNC machine by Taguchi-and RSM method” International Journal of Engineering, Science and Technology, 10(1), pp: 13 – 22.
51. Sharma B. M., Gaur, M.K. and Agrawal S. (2017). Response Surface Approach of Optimization to study the Effects of Drilling Parameters in AISI-304 Stainless Steel. Journal of Mechatronics and Automation 4 (2), pp.21-32.
52. Yadav D S., Gaur, M.K, Jayaswal P. and Agrawal S. (2017). “Parametric Optimization of TIG Welding on AISI-304 Stainless Steel Plate by Taguchi based RSM Method” Trends in Machine Design 4 (2), pp.30-40.
53. Motwani A., Gaur, M.K. and Agrawal S. (2017). “Analysis of Machining Parameters in Wire EDM with Aluminum Alloy Using PCA and TOPSIS Approach” Journal of Mechatronics and Automation 4 (2), pp.1-11.
54. Singh K. P., Singh B. K. and Gaur, M.K. (2017). “Multi-variable Analysis and Optimization of Electrical Discharge Machining Process Using a PCA-ANN based Approach” Trends in Opto Electro & Optical Communications, Vol. 6(3) pp.1-7.
55. Kain, Gaur M.K. and Agrawal S (2016) “Optimization of Machining Parameters for End Milling of 1018 Mild Steel using Taguchi based Grey Relational Analysis” Journal of Mechatronics and Automation, Vol. 3, (2), pp. 36-47.
56. Pathak M. and Gaur, M.K. (2016) “Parameters Optimization of EDM of AISI 316 Stainless Steel Material using RSM” Journal of Industrial Safety Engineering, Vol. 3(2) pp.1-7.
57. Yadav S. and Gaur, M.K. (2016). “Parametric Optimization of MRR and TWR on Electro Discharge Machining Using Taguchi’s Methods and ANOVA”, International Journal of Electronics, Electrical and Computational System, Vol. 5 (4), pp: 105 – 110.
58. Sahu A., Gaur, M.K. and Shrivastava P. (2016). “Analysis of Material Handeling Management in Small Scale Industry”. European Journal of Advances in Engineering and Technology, 3(2), pp: 39 – 44.
59. Kumar A., Dubey A., Gaur, M.K. and Samadhiya V. (2015). “Analysis of Injection Moulding Process Parameters on PVC Material via Taguchi-ANOVA” Journal of Experimental & Applied Mechanics, Vol. 6(2), pp: 1 – 9.
60. Sharma A., Chaturvedi V. and Gaur M.K. (2015). “Optimization of Process Parameters of Two Way Abrasive Flow Machining by Grey Relational Analysis Coupled with Principle Component Analysis” Journal of Experimental & Applied Mechanics, Vol. 6(2), pp: 1 – 13.
61. Kumar A., Gaur, M.K., Kasdekar D. and Agrawal S. (2015). “Time-Based Optimization of Injection Moulding Process Using Response Surface Methodology” European Journal of Advances in Engineering and Technology, 2(5), pp: 97 – 102.
62. Agrawal S., Gaur, M.K., Kasdekar D., Agrawal S. and Malvi C. S (2015). “Optimal Machining Condition for Turning of Hard Porcelain using Response Surface Methodology” European Journal of Advances in Engineering and Technology, 2(5), pp: 1 – 5.
63. Agrawal S., Gaur, M.K., Kasdekar D., and Agrawal S. (2015). “Application of RSM on Performance Characteristics in turning of Hard Porcelain Material” Trends in Mechanical Engineering and Technology, (STM Journal) 2(2), pp: 40 – 49
64. Gaur L., Gaur, M.K. and Malvi C. S. (2015). “Scram Jet Combustor With Pylon Injector By Computational Fluid Dynamics Analysis” International Journal of Advanced Technology in Engineering and Science, 3(3), pp: 81 – 92.
65. Srivastav P. and Gaur, M.K. (2015). “Barriers to Implement Green Supply Chain Management in Small Scale Industry using Interpretive Structural Modeling Technique - A North Indian Perspective” European Journal of Advances in Engineering and Technology, 2(2), pp: 6 – 13.
66. Srivastav P. and Gaur, M.K. (2015). “Scope of Green Supply Chain Management In North Indian Construction Industries” International Journal of Advanced Research in Engineering and Applied Science, 4(4), pp: 53 – 73. ISSN: 2278-6252 (I.F = 5.795)
67. Srivastav P., Gaur M.K. and Singh A.P. (2015). “LPG Conservation in Biscuit Industry: A Technical Modification of Oven” Trends in Mechanical Engineering and Technology, (STM Journal) 5(1), pp: 1 – 5.
68. Kasdekar D. K., Parashar V., Singh J. and Gaur, M.K. (2014). “Optimization of EDM Process Based on the Orthogonal Array with Taguchi Method” Int. Research J. of Engineering and Applied Science, Vol 2 (2), pp 16 - 28.
69. Kasdekar D. K., Parashar V., Singh J. and Gaur, M.K. (2014). “Taguchi Method and ANOVA: An Approach for Selection of Process Parameters of EDM of EN – 353 Steel” ”. Int. J. Emerging Tech. and Adv. Engineering, 4(6), 313-321.
70. Chouhan R., Gaur, M.K. and Tripathi R. (2013). “A Survey of Preventive Maintenance Planning Models, Techniques and Policies for an Ageing and Deteriorating Production Systems” HCTL Open Int. J. of Technology Innovations and Research, 3, pp: 1-19.
71. Chouhan R., Gaur, M.K. and Tripathi R. (2013). “Implementing a Preventive Maintenance Planning Model on an Ageing and Deteriorating Production System” HCTL Open Int. J. of Technology Innovations and Research, Vol. 4, pp: 1-24.
72. Ahirwar, A.K., Gaur, M.K., Khare, A., (2013). “Strategic Analysis for Reliability of Diesel Locomotive of Indian Railway”. Int. J. Emerging Trends in Engineering and Development, 3(1), 491 – 505. (I.F=2.87)
73. Ahirwar, A.K., Gaur, M.K., Sirohiya, V. K., (2013). Case Study of Managerial Approaches for Maintenance of Diesel Locomotives in Indian Railways”. Corona Journal of Science and Technology, 2(1), 28 – 34.
74. Singh R., Gaur, M.K., Malvi, C.S. (2013). “A Study and Design Based Simulation of Hybrid Solar Car”. Int. J. Emerging Tech. and Adv. Engineering, 3(1), 685-691. (IF = 1)
75. Mishra O. P., Gaur, M.K., (2012). “Evaluate effectiveness of RO system for thermal Power plant-a case study of Rayru filtration plant” IJESS, 2(11), 87- 97.
76. Kumra, A., Gaur, M.K., Malvi, C.S., Gupta R.B., (2012). “Sizing of Standalone Photovoltaic System for Cottage Industry in a Remote Rural Area In India”. J. of Research in Economics & Social Sciences, 2(11), 1 – 12.
77. Pandey, R, Gaur, M.K., Malvi, C.S. (2012). “Estimation of Cost Analysis for 4 kW Grids Connected Solar Photovoltaic Plant”. J. of Modern Engineering Research, 2(6), 4292- 4294. (I.F =1.227)
78. Singh R., Gaur, M.K., Malvi, C.S. (2012).Study of solar energy operated hybrid mild cars: a Review, Int. J. of Scientific Engineering and Technology, 1(4), 139 – 148. (I.F =0.489)
79. Pandey, R, Gaur, M.K., Malvi, C.S. (2012). “Review of Practices of Grid Connected Solar Photovoltaic Potential”. Int. J. of Research in Engineering and Applied Sciences, 1(10), 8 - 18.
80. Kumra, A., Gaur, M.K., Malvi, C.S., (2012). Sizing of a standalone photovoltaic system for small scale industry. Int. J. Emerging Tech. and Adv. Engineering, 8(20),65-69.
81. Gaur, M. K., Mishra O. P., Pachoriya, R. (2012). “Two Stage Filtration System in Full Scale Boiling Water for Thermal Power Plant”. Int. J. Emerging Trends in Engineering and Development, 2(5), 81 – 86. (I. F =2.87)
82. Gond, B.K., Gaur, M.K., Malvi, C.S., (2012). “Manufacturing and performance analysis of solar flat plate collector with phase change material”. Int. J. Emerging Tech. and Adv. Engineering, 2(3), 456-459. (IF = 1)
83. Bhadouriya, B.S., Gaur, M.K., Malvi, C.S., (2012). “Manufacturing and Performance evaluation of Corrugated Polycarbonate Hybrid Solar Water Flat Plate Collector”. J. Emerging Tech. and Adv. Engineering, 2(3), 445-448. (IF =1)
National Journal
1. Gupta, R.D., Gaur, M.K., Ghai, S., (2007). Energy Efficiency Improvement Strategies for Industrial Boiler- a Case Study. Renewable Energy potential and Sustainable development, 42(a), (7), MITS Special, 242-247.
International Conference
1. Shah R., Pandit R.K., Gaur M.K., Assessing energy efficiency of built environment for future cities: A review, Proceedings of International Conference on Future Cities-2019, Chapter-159, 597-600.
2. Bhatia P., Pachauri A., Sood A, Gaur M.K. (2019) “A mini review: Polymer-matrix nanocomposites and its synthesis techniques” AIP Conference Proceedings 2142(1):150011, doi:10.1063/1.5122560.
3. Sharma, A.K., Gaur, M.K and Dwivedi, R.K. (2018), “Parametric study on vibration and harmonic analysis of moderately thick functionally graded plates using FEM” MATEC Web of Conferences 237(12-16):01007. doi:10.1051/matecconf/201823701007
4. Gaur M.K, Saxena G, Kushwah A, Gupta A, Pandey K.D., Malvi C.S. (2017).“Recent development and applications of evacuated tube solar collectors” Smart Technologies for Green and Sustainable Future (STGSF-2017) Maulana Azad National Institute of Technology, Bhopal (M.P.) pp.83-89
5. Gaur M.K, Saxena.G, Kushwah.A, Gupta. A, Bachoolal (2017).“Recent Advancement , Applications And Performance Study Of Various Types Of Solar Dryers Smart Technologies for Green and Sustainable Future (STGSF-2017) Maulana Azad National Institute of Technology, Bhopal (M.P.),pp.92-100
6. Gaur, M. K.,Tiwari, D., Goyal, K., Solanki, S. C., (2012). A Review on Solar Assist Vapor Absorption Refrigeration System. Abs. (ST - 01), pp01, International conference on Energy Security, Global Warning and Sustainable Climate, SOLARIS, 7 – 9 February, 2012.
7. Bhartiya, J.K., Gond, B.K., Bhadouriya, B., Gaur M.K., Patra, A., Malvi, C.S., (2012). “Development and demonstration of a cost effective process to fabricate a solar photovoltaic panel at local level” Abs. (PV - 10), pp43, International conference on Energy Security, Global Warning and Sustainable Climate, SOLARIS, 7 – 9 February, 2012.
8. Gaur, M.K., Tiwari, G.N., Kumar, Shiv and Malvi, C.S. (2012). Heat and Mass Transfer Analysis of High Performance Solar Distillation Systems: Review, Abs. (ST - 11), pp07, International conference on Energy Security, Global Warning and Sustainable Climate, SOLARIS, 7 – 9 February, 2012.
9. Jain Sanjeev, Gaur M.K., Tiwari, D., Goyal, K. Solanki, S.C., Agrawal, S., (2012) “A Study on Amorphous silicon based Photovoltaic power systems, and the Future prospects” Review, Abs. (PV - 27), pp53, International conference on Energy Security, Global Warning and Sustainable Climate, SOLARIS, 7 – 9 February,2012.
10. Hardy K. P., Malvi C.S., Gaur M.K., Dixon-Hardy D. W. and Crook R. (2011)“A Low Cost PV Panel Assembly Targeted At Rural Energy Supply In Developing Nations” ISES conference in Kassel, Germany .pp 1086-1093 August (2011). doi:10.18086/swc.2011.07.04
11. Malvi C.S., Tripathi A.K.,Gaur M.K., (2007). Reliable solar water pasteurizer: an approach to purify the drinking water. pp 229-234 proc. of 3^rd International Conference Solaris at IIT Delhi.
12. Gaur, M.K., Malvi, C.S., Gupta, P., (2007).Energy Saving By the Application of Domestic Solar Heating Systems. 148-151, Proc. of 3^rd International Conference Solaris at IIT Delhi.
13. Gaur, M.K., Sharma, A., Gupta, P., (2004). Energy Recovery from Municipal Solid Waste: A Case Study for Gwalior Town” pp843-849, Proc. of 14^th ISME International Conference at Delhi College of engineering Delhi.
14. Malvi, C.S., Gaur, M.K. (2005). Development and Fabrication of Domestic Wind Mill. pp. 311, ICORE-, Pune.
15. Gaur, M.K., Malvi, C.S. (2004). Effect of Reinforcement Volume Fraction and Heat Treatment on Mechanical Properties of AA2014 Al alloy–SiCp composites. Proc. of International Conference at BHU Varanasi, Recent Advances in Composite Materials, pp 452-458.
National Conference
1. Singh, P.,Gaur, M.K., Thakur, V.K., Kushwah, A. (2019).“Modern Trends in Solar Drying: A Short Review”. Abs 18, Book on Modern Tools in Engineering, ISBN No. 978-93-82346-25-8.
2. Thakur, V.K.,Gaur, M.K.., Sagar, M.K., Singh, P., Kushwah, A. (2019). “A Review on Modern Trends in Solar Thermal Technologies”. Abs 19, Book on Modern Tools in Engineering, ISBN No. 978-93-82346-25-8.
3. Shah, R., Pandit, R.K., Gaur, M.K., Kushwah, A. (2019). “Advances in Building Thermal Comfort using Solar Energy: A State of Art Review”. Abs 22, Book on Modern Tools in Engineering, ISBN No. 978-93-82346-25-8.
4. Malvi, C.S., Gaur, M.K., Tripathi, A., Agarwal, B., (2006).A Conceptual Framework and Approaches for Rapid Design And Development Process Through Cad/Cam”. pp 14-19, proc. of national seminar on ETTCME, India.
5. Gaur, M. K., Tripathi A., Jain, V., Agarwal, B. (2006). Energy Saving by using solar water heating system. pp 62 - 66, proc. of national seminar on ETTCME, India.
6. Gaur, M.K., (2006).Municipal Solid Waste: An Alternative Fuel for Power Generation”- A Case Study for Gwalior City. Abs. pp72 Young Scientist Congress2006 at Rewa
7. Malvi, C.S., Gaur, M.K., Tripathi, A. Building Augmented Wind turbine. pp 206-211 National conference at MITS Gwalior
8. Gaur, M. K., (2007). Energy Saving By the Application of Domestic Solar Heating Systems. Abs. pp64-65 at 22^ndYoung Scientist Congress 2007 at SATI Vidisha.
9. Goyal K., Tiwari D., Valecha J., Gaur M.K. (2011) Evaluation of Solar Absorption Cooling System, Abs B2 National Conference on Refrigeration and Air Conditioning (NCRAC-2011), IIT Madras, Chennai, 7-9 July 2011
Book Chapters
1. Singh P, Gaur M.K., A Review on Role of Solar Drying Technology in Sustainable Development, Proceedings in Adaptation, Learning and Optimization, ICSISCET 2019, Springer PALO 13, pp. 18–27, 2020. https://doi.org/10.1007/978-3-030-44758-8_3.
2. Thakur V.K., Gaur M.K., Sagar M.K., Role of Advance Solar Desalination Techniques for Sustainable development, Proceedings in Adaptation, Learning and Optimization, ICSISCET 2019, Springer PALO 13, pp. 28–38, 2020. https://doi.org/10.1007/978-3-030-44758-8_4.
3. Shah R., Pandit R.K., Gaur M.K., Role of Computational Fluid Dynamics in Sustainable Urban Built Environment: A Review, Proceedings in Adaptation, Learning and Optimization, ICSISCET 2019, Springer PALO 13, pp. 399–411, 2020. https://doi.org/10.1007/978-3-030-44758-8_37.
4. Gaur M.K., Tiwari G.N., Kushwah A, Kumar A. and Saxena G. Integrated PVT Hybrid Active Solar Still (HASS) with an optimized Number of Collectors. Solar Desalination Technology, Green Energy Technology, Springer, PP. 219. https://doi.org/10.10O7/978-981-13-6887-5
5. Gaur M.K., Singh, S.K., Sood A. and Chauhan D.S. Experimental Investigation of Physical and Tribological Properties of Engine Oil with Nano-particles Additives. Springer International Publishing AG, DSMIE 2018, LNME, pp. 255-268, 2019. https://doi.org/10.1007/978-3-319-93587-4_27
6. Shah R., Pandit R.K., Gaur M.K., Role of Building Design in Sustainable Green Development: A Review, Proceedings of Second International Symposium on Sustainable Development Research in the Asia-Pacific 2019. Springer, Cham, 55-74. https://doi.org/10.1007/978-3-030-61891-9
7. Singh P., Gaur M.K, (2021) Enviro-Economic Analysis of Ginger Drying in Hybrid Active Greenhouse Solar Dryer, Springer Nature Singapore, Artificial Intelligence and Sustainable Computing, Algorithms for Intelligent Systems, 117-128, https://doi.org/10.1007/978-981-16-1220-6_11
8. Thakur V.K., Gaur M.K, Sagar M.K. (2021) Performance analysis of different tilt angles based solar still, Springer Nature Singapore, Artificial Intelligence and Sustainable Computing, Algorithms for Intelligent Systems, 189-200, https://doi.org/10.1007/978-981-16-1220-6_17
9. Saxena G., Gaur M.K, Kushwah A. (2021) Performance analysis and ANN Modelling of Apple drying in ETSC-Assisted Hybrid Active Dryer, Springer Nature Singapore, Artificial Intelligence and Sustainable Computing, Algorithms for Intelligent Systems, 275-294, https://doi.org/10.1007/978-981-16-1220-6_24
10. Shah R., Pandit R.K., Gaur M.K., (2021) Artificial Neural Networks as a Tool for Thermal Comfort Prediction in Built Environment, Springer Nature Singapore, Artificial Intelligence and Sustainable Computing, Algorithms for Intelligent Systems, 155-165, https://doi.org/10.1007/978-981-16-1220-6_14
Books Publication
1. Tiwari, G. N., Barnwal, P., Solanki, S. C., Gaur, M.K., (2008). Solar Energy: Problems Solutions and Experiments. ISBN 13978-81-88342-64-8; Anamaya Publishers, New Delhi, India.
2. Agrawal S., Gaur, M.K., Kasdekar D., “Optimization of machining parameters of hard porcelain on CNC machine” (2015); 978-3-659-77788-2; Lap Lambert Academic Publishing House Germany
3. Gaur M.K., Norton B., Tiwari G.N., (2021) “Solar Thermal Systems: Thermal Analysis and its Applications”, Bentham Publications (Accepted, In Press)
Complete Resume:
Click here to view

माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत
Madhav Institute of Technology & Science, Gwalior (M.P.), INDIA

Deemed University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

Deemed to be University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

Mechanical Engineering

Dr. Manoj Kumar Gaur

Important Links

Get in Touch

Locate Us

माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत Madhav Institute of Technology & Science, Gwalior (M.P.), INDIA

Deemed University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

Deemed to be University

(Declared under Distinct Category by Ministry of Education, Government of India)

NAAC ACCREDITED WITH A++ GRADE

Mechanical Engineering

Dr. Manoj Kumar Gaur

Important Links

Get in Touch

Locate Us

माधव प्रौद्योगिकी एवं विज्ञान संस्थान, ग्वालियर (म.प्र.), भारत
Madhav Institute of Technology & Science, Gwalior (M.P.), INDIA